The Inverto OneNet™ TDMA3 Access Point is purpose-built for rural and semi-rural fixed wireless broadband deployments. Operating in the unlicensed 5 GHz band, it delivers high-throughput, low-latency connectivity across a 90–120° sector, enabling a single unit to serve dozens of subscriber premises simultaneously.
Its TDMA3 air protocol with Intelligent Dynamic Slot Allocation ensures fair bandwidth distribution and minimises interference even in dense deployment environments. Combined with Inverto’s MoCA Access gateway CPE, the OneNet™ system provides a seamless last-mile-plus-in-building broadband solution — from the tower to the TV.
Its TDMA3 air protocol with Intelligent Dynamic Slot Allocation ensures fair bandwidth distribution and minimises interference even in dense deployment environments. Combined with Inverto’s MoCA Access gateway CPE, the OneNet™ system provides a seamless last-mile-plus-in-building broadband solution — from the tower to the TV.
Main Features
- 18 dBi dual-polarisation integrated sector antenna covering 90–120° horizontal beamwidth, up to 5 km range
- TDMA3 air protocol with Intelligent Dynamic Slot Allocation — optimises time-slot scheduling per subscriber for low latency and high aggregate throughput
- IEEE 802.11a/n/ac (up to 866 Mbps) with 5/10/20/40/80 MHz channel widths, including narrowband modes for spectrum-constrained environments
- Extended frequency range 4.9–6.1 GHz (non-standard mode) and ATPC for efficient spectrum use and interference mitigation
- Ruggedised IP66-rated outdoor enclosure rated for –40°C to +70°C with ESD and electrical surge protection
- Gigabit PoE WAN port, VLAN, IPv4/IPv6, HTTP(S) GUI, SSH, SNMP, and WNMS cloud management
| Horizontal Polarization | Vertical Polarization |
 |
 |
| System | |
|---|---|
| CPU | QCA9563 + QCA9882 + AR8033 |
| Flash | SPI NOR 16 MB |
| DDR | DDR2 64 MB |
| Wi-Fi Standard | IEEE 802.11a/n/ac |
| Max Data Rate | 866 Mbps |
| Frequency Band | 5.150–5.850 GHz (extended: 4.9–6.1 GHz) |
| Channel Width | 5 / 10 / 20 / 40 / 80 MHz |
| Tx Power |
802.11a: 54M +24 ± 2 dBm, 6M +27 ± 2 dBm 802.11n HT20: MCS7 +23 ± 2 dBm, MCS0 +26 ± 2 dBm 802.11n HT40: MCS7 +22 ± 2 dBm, MCS0 +25 ± 2 dBm 802.11ac: MCS9 +21 ± 2 dBm, MCS0 +24 ± 2 dBm |
| RX Sensitivity |
802.11a: 54M -72 dBm, 6M -92 dBm 802.11n HT20: MCS7 -70 dBm, MCS0 -89 dBm 802.11n HT40: MCS7 -68 dBm, MCS0 -87 dBm 802.11ac: MCS9 -58 dBm, MCS0 -85 dBm |
| Air Protocol |
TDMA3 - Intelligent dynamic polling, Automatic channel selection, Automatic modulation mode selection, Automatic transmission power control (ATPC) |
| Working Mode | Access Point (TDMA3 / Auto WDS), Site (WDS/TDMA3 / ARPNAT) |
| Antenna | |
| Type | Built-in dual-polarisation flat sector antenna |
| Gain | 18 dBi |
| Polarization | Vertical / Horizontal dual polarisation |
| Horizontal Beam Angle | 90° (–3 dB) / 90–120° (–10 dB) |
| Vertical Beam Angle | 7.5° |
| Working Frequency | 4.9–6.1 GHz |
| Networking | |
| WAN | 1 × 10/100/1000M; 24V passive PoE input |
| Network Mode | IPv4 / IPv6 |
| VLAN | VLAN, VLAN transparent transmission |
| WAN Protocol | Static IP, DHCP client |
| Wireless QoS | TDMA 4-queue priority |
| Security | WPA/WPA2 Personal & Enterprise, WACL, user isolation |
| Services | DHCP, SNMP, NTP client, route tracking, ping watchdog |
| Management | HTTP(S) GUI, SSH, SNMP read, NMS, Telnet |
| Built-in Tools | Site survey, connection testing, antenna calibration |
| Mechanical & Power | |
| Dimensions (H × W × D) | 430 × 98 × 80 mm |
| Weight | 0.6 kg |
| IP Rating |
IP66 |
| Power Supply | PoE 24V / 1A passive |
| Power Consumption | < 10 W |
| Indicators | Power, WAN, Signal ×4 |
| Reset |
Press 10 sec for factory reset |
| Environmental | |
| Operating Temperature | –40°C to +70°C |
| Storage Temperature |
–40°C to +70°C |
| Humidity | 5%–95% non-condensing |
| ESD Protection | Air: ±8 kV, Touch: ±6 kV |
| Electrical Surge | Common Mode: 4 kV, Differential Mode: 2 kV |
| Logistical Information | |
| Dimensions (W x D x H) | 430 mm × 98 mm × 80 mm |
| Weight | 0.6 Kg |
| Package |
1 x Access point unit 1x Rack kit 1x PoE adapter 1x User manual |
Specifications
Images
